A pre-tested, pre-terminated complete network cabling system, saving time on installation and providing guaranteed quality.
HellermannTyton's unique RapidNet cabling solution has been designed to maximise the concept of pre-termination by including both copper and fibre media. Virtually every traditional cabling scenario can be provided from the RapidNet portfolio.
RapidNet addresses the critical issues for cabling installations such as quality control, consistent repeatable terminations, installation time and the human resource required to complete a successful project on time and within budget. Each individual link is pre-terminated and test-approved before it leaves HellermannTyton's ISO approved manufacturing facility. RapidNet offers a quick and clean installation where reliability and quality are not compromised. RapidNet can help achieve a successful installation across a variety of industry and business sectors. From data centres to new office builds, for finacial, health or pharmaceutical companies, the list of applications for the RapidNet system is extensive. RapidNet is the perfect solution where the installation is restricted to a confined space. It will also reduce disruption to a confined space. It will also reduce discrupition by cutting "downtime" dramatically for "business as usual" project, whilst saving costs on waste management.
Premier pre-terminated network cabling system.
12 Port RapidNet - Cassette to Bare End
The 12 Port Cassette to Bare end
RapidNet option is specifically designed for projects where space between rooms is limited or lengths are uncertain at the planning stage. The bare end can then be terminated to specified outlets or panels making it an ideal solution for offices call centres and data centres.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room – Cabinet to cabinet
-
Under Floor and Ceiling Void – Cabinet to Consolidation Point
-
Business as Usual Refurbishment – 5pm till 9am after hours working
-
Time Critical Installations – Time saving
-
Disaster Recovery – Terminated ready for use
-
Sporting Events – Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
12 Port RapidNet - Cassette to Cassette
The 12 Port Cassette to Cassette RapidNet is ideal for modern data centers where moves adds and changes are part of mission critical operations.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room - Cabinet to cabinet
-
Under Floor and Ceiling Void - Cabinet to Consolidation Point
-
Business as Usual Refurbishment - 5pm till 9am after hours working
-
Time Critical Installations - Time saving
-
Disaster Recovery - Terminated ready for use
-
Sporting Events - Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
|
12 Port RapidNet - Cassette to Fanout Plug
The RapidNet Cassette to RJ45 Plug (Fan-out) solution has been specially designed for cabinet to active equipment installations.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room – Cabinet to cabinet
-
Under Floor and Ceiling Void – Cabinet to Consolidation Point
-
Business as Usual Refurbishment – 5pm till 9am after hours working
-
Time Critical Installations – Time saving
-
Disaster Recovery – Terminated ready for use
-
Sporting Events – Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
12 Port RapidNet - Cassette to Plug
The RapidNet Cassette to RJ45 Plug (Same Length) solution has been specially designed for cabinet to active equipment installations.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room – Cabinet to cabinet
-
Under Floor and Ceiling Void – Cabinet to Consolidation Point
-
Business as Usual Refurbishment – 5pm till 9am after hours working
-
Time Critical Installations – Time saving
-
Disaster Recovery – Terminated ready for use
-
Sporting Events – Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
|
12 Port RapidNet - Cassette to Pod
The Cassette to Pod option is designed to support any to the desk installation in various commercial environments including offices, trading floors and schools.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room – Cabinet to cabinet
-
Under Floor and Ceiling Void – Cabinet to Consolidation Point
-
Business as Usual Refurbishment – 5pm till 9am after hours working
-
Time Critical Installations – Time saving
-
Disaster Recovery – Terminated ready for use
-
Sporting Events – Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
12 Port RapidNet - Cassette to Split Cassette
The RapidNet Cassette to split cassette is ideal for inter-cabinet linking within offices, call centers and data centers.
Features and Benefits
-
Factory pre-terminated and tested
-
Meets all ISO/TIA Category 6 performance standards
-
Backward compatible with C5E and C5
-
Available in CAT6 and CAT5E UTP
-
Includes Rack-Snap inserts
Applications
-
Communications Room – Cabinet to cabinet
-
Under Floor and Ceiling Void – Cabinet to Consolidation Point
-
Business as Usual Refurbishment – 5pm till 9am after hours working
-
Time Critical Installations – Time saving
-
Disaster Recovery – Terminated ready for use
-
Sporting Events – Re-usable for different events
Technical Description
Designed to present twelve pre-terminated Category 6 UTP un-shuttered outlets built into a protective case.
Can also be used in cabinets, desktops and consolidation boxes using the mounting sleeve.
The Black PC/ABS plastic Cassette is designed to clip into the mounting sleeve with the whole operation taking no more than seconds to complete.
The quick release latches allow the cassette to be removed and replaced in the mounting sleeve allowing the assembly to be relocated within a data centre for example or used as a temporary installation.
|
RapidNet Mesh + Clips
Features and Benefits
-
For use in cabinets
-
Works in conjunction with RapidNet cable management clips
-
Up to 47u high
-
300mm deep
-
2" squares
-
Bright zinc finish
-
Complete with fixing kit
Product Codes
|
Part Number |
UNS Number |
Description |
|
RN Mesh Kit
|
859-35007 |
RapidNet Mesh Kit
|
|
RNCCC
|
859-35001 |
RapidNet Cable Managment Clip Cover
|
|
RNCC5
|
859-10001 |
RapidNet Cable Management C5E
|
|
RNCC6
|
859-35000 |
RapidNet Cable Management C6
|
|
|
|
